English 
Views: 0 Author: Site Editor Publish Time: 2022-02-17 Origin: Site
To make full use of more space, homeowners will design the garage space for storage design, which is installed on the top of the garage top-mounted cabinet tool chest, also known as the top cabinet. So how exactly do you install the top cabinet in the garage? In the absence of the choice of suitable products, you need to give more consideration to the conformity of the product, the following is an introduction to the installation of top-mounted cabinet tool chest.
Here is the content list:
l Check the order
l Measure the tool cabinet body
l Marking nails
l Adjust the position
l Installation
l Pull out
l Adjust up and down
The top cabinet tool chest is installed from left to right or from right to left, with the cabinet facing down.
After the panel installation of the top cabinet tool chest is completed, measure the diagonal of the cabinet body and the error should be less than 1mm.
After measuring the diagonal line, mark the nail position in detail on the side panel to facilitate the installation of the fixed back panel or laminate.
After placing the tool chest in place, use a level to measure whether the cabinet is level. If it is not, adjust it to a
horizontal position. A common method is to add a wooden block under the cabinet.
After the cabinet-level of the top cabinet toolbox reaches the standard, install: hooks, drawers, doors, sliding doors, telescopic mirrors, and then install the handles that customers need.
When installing the tool chest, the cabinet body is not all the rest of the panels or shelves installed, but first on the cloth, unzip the cloth zipper, the middle of the cloth is also opened, the bottom is down. Dig a small hole at the bottom of the cloth, and pull the cloth vertically from top to bottom according to the distribution of the cloth holes.
Install the other pipes on the cloth, then pull the cloth up to cover the top of the installation pipe, and adjust it up and down until there are no wrinkles on the surface of the cloth, and the installation of the top cabinet tool chest is complete.
Kinbox offers excellent all-around support. After you get your container, our experienced staff will be ready to advise and help you. Whether you need replacement parts, repairs, or customer service, we are always here to help.
Ningbo Kinbox Tools Technology Co., Ltd. was established in 2013, specializing in processing iron and sheet metal products. Over the years, it has developed into a modern and dynamic industry producing tool carts, tool cabinets, tool carts, garage storage systems, and workbenches.
Thanks to production using the most advanced sheet metal processing and handling technology, combined with a dynamic organization, Kinbox has become one of the leading companies in the industry and is now present in both the domestic and international markets.
